Cu or AL Conductor PVC Insulated Unarmoured Cable

Product Detail

Application

Distribution and signal power cable for static application in ground, in water, within facilities, in cable canals, in concrete, where heavier mechanical stresses are not expected, and the cable has to be protected against mechanical damages, also in conditions where cables are not exposed to heavier tensile strains

Used in electric power plants, transformer stations, industrial plants, metropolitan networks and in other electric plants where heavier current and thermal loads are expected (operating temperature of conductor up to 70?)..




Standard:

IEC 60502-1, BS 7870, BS 5467, HRN HD 603 S1, DIN VDE 0276-603, GB/T 12706.1 and SABS 1507




Technical Data

Conductor:	Cu, class 1 or 2 acc. To IEC 60228 / DIN VDE 0295
Insulation:	PVC (Polyvinyl Chloride)
Sheath:	PVC (Polyvinyl Chloride)
Sheath Colour	Black
Voltage Rating U0 /U:	0.6/1kV
Bending Radius for Single Core:	Minimum: 15 x Ø
Bending Radius for Multi Core:	Minimum: 12 x Ø
Operating Temperature Rating	0?to +70?
Short-circuit Maximum Conductor Temperature:	160?
Flame retardant (self-extinguishing) cable:	Acc. to IEC 60332
Core colour marking:	Acc. to HRN HD 308 S2 / VDE 0293-308
Core Identification (option 1)	Core Identification (option 2)
1 Core: Red or black	1 Core: Brown
2 Cores: Red, Black	2 Cores: Brown, Blue
3 Cores: Red, Yellow, Blue	3 Cores: Brown, Black, Grey
4 Cores: Red, Yellow, Blue, Black	4 Cores: Blue, Brown, Black, Grey
5 Cores: Green/Yellow, Red, Yellow, Blue,Black	5 Cores: Green/Yellow, Blue, Brown, Black,Grey
Alternative core identification: White cores with Black  numbers	Alternative core identification: White cores with Black  numbers




Structure:

1: Conductor  2: Insulation 3: Outer Sheath




Construction Data: CU/XLPE/PVC 0.6/1kV

No.	No. of cores and cross-section (No x mm²)	No.& Diameter of Wires No./mm (mm)	Nominal Thickness of Insulation mm	Nominal Thickness of Sheath mm	Overall Diameter of Cable mm	Approx. Mass of Cable kg/km	Current  rating laid direct (Amp)
1	1 x 4	1/2.25	1.0	1.4	7.1	89	56
2	1 x 6	1/2.76	1.0	1.4	7.6	112	67
3	1 x 10	7/1.33	1.0	1.4	8.6	159	89
4	1 x 16	7/1.68	1.0	1.4	9.6	224	115
5	1 x 25	7/2.14	1.2	1.4	11.1	327	148
6	1 x 35	7/2.52	1.2	1.4	12.2	429	177
7	1 x 50	12/2.35	1.4	1.4	13.8	563	209
8	1 x 70	19/2.20	1.4	1.5	15.7	779	256
9	1 x 95	23/2.35	1.6	1.5	17.8	1050	307
10	1 x 120	29/2.35	1.6	1.6	19.3	1291	349
11	1 x 150	36/2.35	1.8	1.6	21.3	1592	393
12	1 x 185	44/2.35	2.0	1.7	23.6	1963	445
13	1 x 240	58/2.35	2.2	1.8	26.4	2534	517
14	1 x 300	61/2.60	2.4	1.9	28.9	3143	583
15	1 x 400	59/2.95	2.6	2.0	32.4	4063	663
16	1 x 500	61/3.25	2.8	2.1	36.3	5116	749
17	1 x 630	91/2.96	2.8	2.2	39.9	6367	843
18	2 x 1.5	1/1.38	0.8	1.8	10.7	130	37
19	2 x 2.5	1/1.78	0.8	1.8	11.5	161	49
20	2 x 4	1/2.25	1.0	1.8	13.2	219	64
21	2 x 6	1/2.76	1.0	1.8	14.2	272	79
22	2 x 10	7/1.33	1.0	1.8	16.8	391	106
23	2 x 16	7/1.68	1.0	1.8	18.8	536	137
24	2 x 25	7/2.14	1.2	1.8	21.8	768	176
25	2 x 35	7/2.52	1.2	1.8	24.0	995	213
26	2 x 50	12/2.35	1.4	1.8	28.2	1325	252
27	3 x 1.5	1/1.38	0.8	1.8	11.1	155	31
28	3 x 2.5	1/1.78	0.8	1.8	12.0	197	40
29	3 x 4	1/2.25	1.0	1.8	13.9	276	52
30	3 x 6	1/2.76	1.0	1.8	15.0	349	64
31	3 x 10	7/1.33	1.0	1.8	17.7	508	86
32	3 x 16	7/1.68	1.0	1.8	19.9	712	112
33	3 x 25	7/2.14	1.2	1.8	23.1	1035	145
34	3 x 35	7/2.52	1.2	1.8	25.5	1357	174
35	3 x 50	12/2.35	1.4	1.8	30.0	1812	206
36	3 x 70	19/2.20	1.4	2.0	34.0	2499	254
37	3 x 95	23/2.35	1.6	2.1	38.8	3376	305
38	3 x 120	29/2.35	1.6	2.2	41.8	4123	348
39	4 x 1.5	1/1.38	0.8	1.8	11.9	186	31
40	4 x 2.5	1/1.78	0.8	1.8	12.9	239	40
41	4 x 4	1/2.25	1.0	1.8	15.0	339	52
42	4 x 6	1/2.76	1.0	1.8	16.2	434	64
43	4 x 10	7/1.33	1.0	1.8	19.2	638	86
44	4 x 16	7/1.68	1.0	1.8	21.7	905	112
45	4 x 25	7/2.14	1.2	1.8	25.3	1327	145
46	4 x 35	7/2.52	1.2	1.8	27.9	1746	174
47	4 x 50	12/2.35	1.4	1.9	33.0	2347	206
48	4 x 70	19/2.20	1.4	2.1	37.5	3247	254
49	4 x 95	23/2.35	1.6	2.2	42.8	4393	305
50	4 x 120	29/2.35	1.6	2.4	46.4	5398	348
51	4 x 150	36/2.35	1.8	2.5	51.4	6678	392
52	4 x 185	44/2.35	2.0	2.7	56.9	8234	444
53	4 x 240	58/2.35	2.2	2.9	63.6	10622	517
54	4 x 300	61/2.60	2.4	3.1	69.5	13151	585
55	5 x 1.5	1/1.38	0.8	1.8	12.7	217	31
56	5 x 2.5	1/1.78	0.8	1.8	13.8	282	40
57	5 x 4	1/2.25	1.0	1.8	16.2	405	52
58	5 x 6	1/2.76	1.0	1.8	17.6	524	64
59	5 x 10	7/1.33	1.0	1.8	20.9	774	86
60	5 x 16	7/1.68	1.0	1.8	23.6	1102	112
61	5 x 25	7/2.14	1.2	1.8	27.6	1624	145
62	5 x 35	7/2.52	1.2	1.9	30.8	2162	174
63	5 x 50	12/2.35	1.4	2.1	36.5	2918	206
64	5 x 70	19/2.20	1.4	2.2	41.3	4018	254
65	5 x 95	23/2.35	1.6	2.4	47.4	5463	305
66	5 x 120	29/2.35	1.6	2.5	51.1	6685	348
67	5 x 150	36/2.35	1.8	2.7	56.9	8304	392
68	3 x 25+16	7/2.14, 7/1.68	1.2/1.0	1.8	24.4	1148	145
69	3 x 35+16	7/2.52, 7/1.68	1.2/1.0	1.8	26.4	1452	174
70	3 x 50+25	12/2.35, 7/2.14	1.4/1.2	1.9	30.4	1958	206
71	3 x 70+35	19/2.20, 7/2.52	1.4/1.2	2.0	34.3	2701	254
72	3 x 95+50	23/2.35, 12/2.35	1.6/1.4	2.2	39.5	3672	305
73	3 x 120+70	29/2.35, 19/2.20	1.6/1.4	2.3	43.1	4604	348
74	3 x 150+70	36/2.35, 19/2.20	1.8/1.4	2.4	46.9	5517	392
75	3 x 185+95	44/2.35, 23/2.35	2.0/1.6	2.6	52.4	6910	444
76	3 x 240+120	58/2.35, 29/2.35	2.2/1.6	2.8	58.3	8872	517
77	3 x 300+150	61/2.60, 36/2.35	2.4/1.8	3.0	64.1	11016	585




Packaging & Shipping
1. Packing Length: 500M 1000M etc.
2. Inner Packing: Wooden reel, Plastic reel, and Paper Reel
3. Outer Packing: Carton box, Pull out box, Pallet available
4. Other packing available according to clients’ request








Our advantages:

1. With more than 20years manufacturing experience ,our products are strictly in according with IEC ,AS/NZS ,UL and BS .

2. Good cost-control system ,with highly-competitive price .

3. Strong and Profeddional R&D team to meet your specific needs .

4. Fast delivery&reliable products are always the reason why you choose us ?

Dragon Brand is one of the ISO9001 certified manufacturers and suppliers of cu or al conductor pvc insulated unarmoured cable in China. Competitive in our excellent products and reasonable price, we warmly welcome you to buy the cheap price product from us.